Chapter V Engine - Baja WD250U Service Manual

Chapter V Engine
Section I Disassembly of Engine
(I) Remove the engine from finished ATV
1. Remove
• Cushion
• Front luggage carrier
• Front bumper
• Front fender
• Rear luggage carrier
• Rear fender
The disassembling method refers to "Fender,
fuel tank disassembly" of chapter II.
2. Oil draining
Screw out oil draining screw plug. Drain off
the lubricating oil of the engine from the oil
draining hole.
3. Exhaust pipe and silencer
1) Remove
• Exhaust pipe (1)
2) Remove
• Silencer (2)
4. Carburetor and air intake pipe
2
Place the throttle cock grip on "OFF"
position, and remove:
1
• Throttle cable (1)
• Oil pipe (2)
• Hoop (3)
3
• Carburetor, carburetor seat and hook hitch
4
assy (4)
CAUTION:
Before disassembling, drain off the gasoline
of the carburetor float cabinet firstly. Wrap
the overflow pipe with cloth to absorb the
splashed gasoline. The gasoline is
inflammable. Pay attention not to splash
gasoline on a hot engine.
5. Starting motor
1) Remove
• Starting motor line (1)
142