Baja WD250U Service Manual page 57

6. Installment
• Lamp (1)
CAUTION:
Be sure that the projective part of the lamp (2) is
engaged with the convex groove (3) on the light
seat.
CAUTION:
Never touch the glass part otherwise the lamp will
loose illuminating value. If there are some oils on it
clean off with cloth mixed with alcohol.
7. Connect
• Light seat (1)
CAUTION:
Be sure that the projective part of the lamp is
engaged with the convex groove on the light seat.
8. Install the lens to the light seat.
9. Installment
• Headlight
CAUTION:
Install the rubber hole-guard ring of the headlight
connecting wire to the headlight.
10. Connect
• Connecting wire terminal of headlight.
57