(I) Disassembly - Baja WD250U Service Manual

(I) Disassembly:

1. Take off front luggage carrier, bumper, and
front fender.
Refer to the second section of chapter 2
Disassemble the front wheel front brake hub,
brake shoe unit, and front brake cap unit.
Refer to "Dischargement of front wheel and
front brake" of this chapter
2. Take off split pin (1) , nut (2) , and steer-
ing rod ball pin assembly (3) .
3. Take off the bolt (3) under the front
shock absorber nut of front shock absorber
(2) and front shock absorber (4) .
4. Loosen the front shock absorber nut (2) .
5. Take off the bolt (3) under the front
shock absorber nut of front shock absorber
(2) and front shock absorber (4) .
6. Take off split pin (5) , nut (6) on the left/
right front seat assy, and left/right front seat
assy (7) .
101