(Iv) Adjustment Of Idle Speed; (V) Adjustment Of Free Clearance Of Throttle Grip - Baja WD250U Service Manual

(IV) Adjustment of idle speed

1. Rest the vehicle on level ground
2. Start the engine and warm it at idle speed of
1000-2000r/min, after several minutes, increase the
engine speed to 4000-5000r/min.
3. Set the specified idle speed through adjusting the
throttle adjusting screw (1) . Screw in to increase
the engine speed and screw out to decrease the
speed.
Specified idle speed: 1450-1550r/min
4. Measure the engine speed with measuring meter.
5. Make sure that the free clearance of the throttle
grip is within 3-5mm, otherwise readjust the idle
speed.

(V) Adjustment of free clearance of throttle grip

CAUTION:
First adjust the engine idle speed when adjusting
throttle grip.
1. Rest the vehicle on level ground.
2. Inspection
• Free clearance of throttle grip (a) . If out of
specifications adjust free clearance of throttle grip:
3-5mm
3. Adjustment
Adjustment steps of free clearance of throttle grip.
a. Loosen the locking nut (2) .
b. Turn the adjusting bolt (1) up to the free clear-
ance of throttle grip a is 3-5mm.
c. Tighten up the locking nut (2) .
a
1 2
CAUTION:
After adjusting the free clearance, move the lever
forward and backward to make sure that the engine
will not lift.
61