Section 12 Troubleshooting - Baja WD250U Service Manual

Section 12 Troubleshooting
(I) If indicator lamp is out
Check:
1. Safety
2. Battery
3. Front switch
• Remove the following parts before trouble-
shooting
1) Cushion
2) Front frame
3) Front pedal
• Use specific tools for troublshooting
1. Safety
Refer to "Inspection of switch"
PASS
2. Battery
• Check the condition of the battery
Refer to "Inspection of battery" in chapter 3.
Voltage of open circuit
12.8V or more at 20˚C (68˚F)
PASS
4. Coupling of wires
(whole signal system)
No electricity
Replace fuse
FAIL
• Clean battery terminal
• Recharge or replace the battery
137
Picket multimeter