Baja WD250U Service Manual page 158

51. Remove
• Nut
• Washer
• Front joint
CAUTION:
Clamp the front joint with gymbal, then loosen
the nut.
1
2
52. Remove
• Output shaft (1)
• Connecting jaw (2)
1
53. Remove
• Inner-hexagon screw bushing (1)
• Bearing (3)
• Washer
3
CAUTION:
Use inner-hexagon screw bushing wrench
54. Remove
• Irregular left handed nut
• Reverse gear
• Washer
CAUTION:
• The irregular left handed nut is left
handed screw thread. Rotate the nut clockwise
when loosening it.
• Use irregular nut wrench
157