Baja WD250U Service Manual page 195

11) Installment:
• Washer (1)
• Main clutch case assy (2)
• Washer (3)
• Clutch shoe assy (4)
CAUTION:
1
2
3 4
• There are two indents (1) on the vice clutch
case.
When installing the main clutch case, one of
the indents should align with the main clutch
gear (2) .
2
1
12) Installment:
• Locking washer (1)
• Nut (2) (main clutch)
1
3
CAUTION:
• Be sure to use new locking washer
• The locating plate of locking washer should
be installed n the indent of clutch shoe assy.
13) Tighten up:
• Nut (2) (main clutch)
CAUTION:
Fasten the clutch shoe assy, then tighten up
nut.
14) Bend the locking plate (3) of locking
washer.
2
194