(Iii) Fuel Tank - Baja WD250U Service Manual

(III) Fuel tank

1. Disassembly
1- Place the vehicle on level ground.
4
2- Remove the cushion (see "cushion disas-
sembly" section)
3- Remove the air hose on the fuel tank cover
4- Remove:
a.Bolt (2) , flat washer 30, installing bush-
ing of upper cover of fuel tank, washer and
rubber hood 2 of fuel tank.
b.Plastic expansion screw assy (3) all around
c.Fuel tank cover (4)
2
3
OFF
6- Turn the fuel shut off valve to the "OFF"
position
7- Remove the fuel inlet pipe (8)
CAUTION:
Place a cloth on the engine to absorb the
splashed gasoline.
WARNING:
The gasoline is flammable. Avoid splashing it
on the hot engine.
8
8- Remove:
4 Bolts (1) , flat washers 30, rubber hood of
fuel tank and installing bushing of fuel tank.
9- Remove the air inlet pipe (2) of air filter,
4
supporting pad (3) of air pipe (5) .
10- Remove the fuel tank (4) .
2
3
1
5
40