(Ii) Inspection Steps - Baja WD250U Service Manual

(II) Inspection step
1. Check the front shock absorber. If there is
leakage, replace it. Check the universal joint.
If it is cracked or damaged, replace the front
shock absorber.
Check spring, if it is fatigued or damaged, re-
place the front shock absorber. (When check-
ing, move the spring up and down).
2. Check the front seat assy of front brake, if it
is cracked, sunk, or damaged, replace it.
WARNING:
If the front axle is bent, don't straighten it.
This is to avoid reducing the performance of
the front axle on the front brake.
3. Check the left/right front wheel fork weld-
ing. If it is cracked, bent, or damaged, replace
it.
WARNING:
If the left/right front wheel fork welding is
bent, don't straighten it sedulously in order to
avoid reducing its performance.
4. Check the bushing sub-assembly (1) , if it
is worn or damaged, replace it.
103