Section 5 Maintenance And Adjustment Of Engine; (I) Adjustment Of Clutch - Baja WD250U Service Manual

Section 5 Maintenance and Adjustment of
1
Engine
2
1
1

(I) Adjustment of clutch

Adjustment steps:
a. Loosen the locking nut (1)
b. Turn the adjusting screw rod (2) counterclock-
wise slowly up to be unable to turn, then turn 1/8
clockwise, and fasten the adjusting screw rod 2 to
this position and tighten up the locking nut 1 with
the torque of N ·m.
CAUTION:
Turn the adjusting screw rod (2) counterclock-
wise to decrease the clearance of clutch, Turn the
adjusting screw rod (2) clockwise to increase the
clearance of clutch.
(II) Clean the air filter
CAUTION:
There is an inspection cup (1) on the bottom of
the air filter, if there is dust or water deposits in the
cap clean the filter core and filter box of air filter.
1. Remove the cushion (Refer to "Cushion Remov-
al" of this chapter).
2. Remove the air filter box cover (1) , air filter
components.
58