Upgrading Software And Firmware - Konica Minolta DRYPRO SIGMA Service Manual

SERVICE MANUAL

Upgrading Software and Firmware

Updating a Portable Flash Drive with a New Version of System Software
Important
Energize your laptop computer before you insert the flash drive into the USB port.
[1] Energize your laptop computer.
[2] Insert the:
• Portable flash drive into the USB port on your laptop computer.
• Ghost CD into the CD-ROM drive of your laptop computer.
[3] Copy the software from the CD-ROM to the flash drive.
Note
The new version of system software on the CD-ROM will overwrite the old version on the flash drive.
[4] When the copy is complete, remove the flash drive and CD-ROM from your laptop computer.
6-16 9G9002 – 2011-08-15