Job Manager Status Messages - Konica Minolta DRYPRO SIGMA Service Manual

Film Supply
State
Not Ready Varies
Cartridge
closure pending

Job Manager Status Messages

The following table describes how the display screen and Web Portal indicate job status to the user:
Job Manager
Status
Active Not applicable
No Media
(Status Code shows
Offline
9G9002 – 2011-08-15
Display Screen
Display Screen
requested size)
Web Portal
Display
Not Ready When the conditions are corrected, the
laser imager can print.
Pause You pressed the Pause button, but the
Requested film cartridge has not started to close
because films are still moving through
the imager. When the cartridge finishes
closing, the Pause symbol turns off and
you can remove the film cartridge.
Web Portal Display
Shows how many jobs having
this status are queued
Shows how many jobs having
this status are queued
DICOM Offline
Diagnostics
Description
Description
The laser imager is accepting
DICOM job requests and film
is available for all current jobs.
The laser imager is accepting
DICOM job requests, but film
of the correct size and type is
not available for at least one
current job.
The laser imager cannot
accept any DICOM job
requests. Restart the imager.
4-7