Setting the Host Name and the IP Address
[1] Obtain from the customer the host name, IP address, subnet, and gateway for the laser imager.
[2] Select Configuration > System > Network.
[3] Click Modify.
Important
The Host Name is the network name for this laser imager. It can be a maximum of 14 characters and a minimum of
one. The first character must be a letter. Other characters can be a letter, a number, or a hyphen (-).
[4] Type:
• Host Name
• IP Address
• Subnet Mask
• Default Gateway
[5] Click Save.
[6] Continue with
"Setting the Service
9G9002 – 2011-08-15
Tracking".
Additional Service Procedures
6-7