Konica Minolta DRYPRO SIGMA Service Manual page 157

Film Jam in Area 2 – Error Codes 323, 324 or 325 (Web Portal code 26323, 26324 or 26325)
Remove the left cover.
[1]
[2] Remove any film from
[3] If the film is not loose, carefully turn the exposure transport knob clockwise to remove the film from the rollers.
[4] Install the left cover.
If misplaced films were never located and this error recurs on the next film, continue with Step 5.
Remove the top cover.
[5]
[6] Remove the left cover.
[7] Remove any misplaced film in the
[8] Install the left cover.
[9] Install the top cover.
Film Jam in Area 2 or 3 – Error Code 326 (Web Portal code 26326)
Remove the top cover.
[1]
[2] Rotate the exit roller handle clockwise until a film exits the laser imager.
[3] If a film does not exit:
Remove the left
(a)
(b) Reach into Area 2
(c) If the film is not loose, carefully turn the exposure transport knob clockwise to remove the film from the
rollers.
[4] Install the left cover.
[5] Install the top cover.
Film Jam in Area 3 – Error Code 543 (Web Portal code 26543)
Remove the top cover.
[1]
[2] Rotate the exit roller handle clockwise until a film exists the laser imager.
[3] Install the top cover.
9G9002 – 2011-08-15
Area 2.
pickup access
cover.
and remove any film.
area.
Diagnostics
4-79