Firmware Version Up; Isw; Outline - Konica Minolta bizhub PRO 1050 Service Manual

Field Service Ver3.0 Nov.2006

5. FIRMWARE VERSION UP

5.1

ISW

5.1.1

Outline

A. ISW (In-System Writer)
• This is an operation in which a control program stored in the flush ROM that is built in each control board in
the copier is rewritten with the board built in the copier main body. Conducting the ISW allows the version up
of control program without changing the board and the installation of the up to date program when replacing
the board. As a tool to conduct the ISW, (ISWTrns (PC software)) can be used for rewriting with the personal
computer (PC) connected to the copier. This tool can rewrite directly a control program in the flush ROM built
in the copier main body.
B. ISWTrns
• This is a software for Windows to rewrite the copier flush ROM and is used for the rewrite of programs (data
transfer) with the copier main body and the personal computer connected with a parallel cable or the USB
cable.
NOTE
• When this machine uses the USB to conduct the ISW, it is necessary to install the USB driver of the
ISWTrns. For procedure for installation, see
XP)" When using the USB, be sure to turn on the radio button of the USB on the ISWTrns [Setting
(S)] - [Communications setting (C)], and then press the OK button.
"5.1.4 A. Installation of the USB driver (Windows2000/
5. FIRMWARE VERSION UP
205