Konica Minolta DRYPRO SIGMA Service Manual page 141

Condition Code: 26-544 – Jam at Densitometer
Web Portal Message
Film Jam in Area 3
Description
System Impact
User Action
Show at DS
DICOM Printer
Status
Unique Symb. ID
Logged for RMS
Condition Code: 27-123 – Polygon Motor Error
Web Portal Message
Optics: Internal
Hardware Failure
Description
System Impact
User Action
Show at DS
DICOM Printer
Status
Unique Symb. ID
Logged for RMS
9G9002 – 2011-08-15
Log Message
Film Jam at
Densitometer: Film at
Densitometer sensor
(S7) failed to detect film
trailing edge
This error occurs if the trailing edge is not detected at the film-at-densitometer
sensor (S7) as the film exits the densitometer. The error is cleared when the
imager top cover is opened then closed. When this error occurs, the processor
stops rotating and the heater is turned off. All jobs in the imager will fail and then
automatically reprint.
The imager can only print jobs that were in process when the error occurred.
The spooler can still accept jobs, but the jobs will not print until the error is
resolved. All jobs that were in process when the error occurred will reprint
completely when the error is resolved. [SI-1]
Clear the jam (see "Film Jam in Area 3 – Error Code 543 (Web Portal code
26543)").
True
WARNING
ERR_DENSITOMETER_JAM
[CartridgeInfo=bbeeee-cjj-d-iii][FilmSize=size]
Log Message
Polygon fails to rotate
at desired speed.
This error occurs when the polygon speed measured by the optics module
microcontroller is out of range. The error clears only when power is cycled.
The imager can only print jobs that were in process when the error occurred.
The spooler can still accept jobs, but the jobs will not print until the error is
resolved. All jobs that were in process when the error occurred will reprint
completely when the error is resolved. [SI-1]
1. Shut down the laser imager, and then restart the imager.
2. If the error persists, call for service.
True
FAILURE
ERR_SPINNER_ERROR
[TriggerValues=a][TriggerNotes=Polygon Speed]
DICOM Printer
StatusInfo
FILM JAM
DICOM Printer
StatusInfo
ELEC DOWN
Diagnostics
Severity
1-Alert
Severity
0-Fatal
4-63