Dre Motherboard Bracket - Konica Minolta DRYPRO SIGMA Service Manual

DRE Motherboard Bracket

Prerequisites:
7 mm nut driver
Tools:
Removal
ESD
Possible damage from electrostatic discharge.
When installing circuit boards, always use a wrist strap to prevent damage from electrostatic
discharge.
[1] Remove the 5 tie wraps that hold the cables in place near the DRE motherboard bracket.
[2] Disconnect the connector and 3 network cables from the DRE motherboard.
Tie Wraps
9G9002 – 2011-08-15
• Close the film cartridge. (Touch the Pause button on the display screen.)
• De-energize the laser imager.
• Disconnect the power cord.
• Remove the back cover.
Connector
Adjustments and Replacements
Tie Wraps
2-45