SERVICE MANUAL
Configuring the SCP Services
[1] Have each SCU send an image to make a connection with the laser imager.
[2] Select Configuration > DICOM SCP > SCP Configuration.
[3] When the SCP Configuration screen appears, click the Modality Preferences tab.
Note
•
The information for each entry in the SCU drop-down list includes, in order: IP Address and AE Title of the
SCU that will send the image, and AE Title of the destination.
•
The parameter values on the screen apply to the modality identified in the SCU list.
[4] At the top of the screen, select an SCU from the drop-down list.
[5] Is the information for the selected SCU correct?
Yes
Perform Steps 4 and 5 for each SCU
in the list.
[6] After the configuration of all SCUs is completed, continue with
6-10
No
a. Click Modify.
b. Select the correct information from the drop-down
lists.
c. Click Save.
d. Perform Steps
4
and
"Checking Image
5
for each SCU in the list.
Quality".
9G9002 – 2011-08-15