Right Cover - Konica Minolta DRYPRO SIGMA Service Manual

Right Cover

Prerequisites:
Phillips screwdriver
Tools:
Removal
Caution Caution
Risk of electric shock: Dangerous voltage present.
[1] Remove the top cover and open the film supply.
[2] Remove 2 screws that attach to the right cover standoffs.
• 1 screw accessible from the top
• 1 screw located underneath the exit tray
H221_6003AC
[3] Remove the right cover from the laser imager.
Installation
Reverse the steps in the removal procedure.
9G9002 – 2011-08-15
• Close the film cartridge. (Touch the Pause button on the display screen.)
• De-energize the laser imager.
• Disconnect the power cord.
Adjustments and Replacements
Right Cover
Screws
2-11