Konica Minolta DRYPRO SIGMA Service Manual page 117

Condition Code: 20-155 – MCS Printer Configuration is Incompatible with Hardware
Web Portal Message
Incompatible MCS
Printer Configuration
for Hardware
Description
System Impact
User Action
Show at DS
DICOM Printer
Status
Unique Symb. ID
Condition Code: 20-156 – Micro Software Version is Incompatible with MCS Software
Web Portal Message
Incompatible Software
Versions Installed
Description
System Impact
User Action
FE Action
Show at DS
DICOM Printer
Status
Unique Symb. ID
9G9002 – 2011-08-15
Log Message
MCS printer
configuration is
incompatible with
model hardware
This error occurs when the MCS application reports that the imager
configuration is incompatible with the hardware model information. The error
clears only when power is cycled.
The imager is unable to print films. The spooler isstill able to accept and queue
jobs but new films will not be initiated. Films downstream of the affected
subsystem will be completed. All other films will be reprinted. [SI-1]
1. Shut down the laser imager, then restart the laser imager.
2. If the error persists, call for service.
True
FAILURE
ERR_MCS_INCOMPATIBLE_HARDWARE
Log Message
One or more micros
have software versions
installed that are
incompatible with the
MCS version
This error occurs during MCS diagnostics when the MCS determines that the
software version of one or more of the microcontrollers is incompatible with the
MCS software version. This error should only happen when the MCS software
is being installed or updated. The error is cleared when MCS diagnostics
passes.
The imager is unable to print films. The spooler is still able to accept jobs but
new films will not be initiated. Films in progress will not be completed. [SI-3]
1. Shut down the laser imager, then restart the laser imager.
2. If the error persists, call for service.
TBD
True
FAILURE
ERR_MCS_INCOMPATIBLE_VERSIONS
DICOM Printer
StatusInfo
ELEC DOWN
DICOM Printer
StatusInfo
PRINTER DOWN
Diagnostics
Severity
0-Fatal
Severity
0-Fatal
4-39