Konica Minolta DRYPRO SIGMA Service Manual page 130

SERVICE MANUAL
Condition Code: 21-139 – Unable to Read or Write to RF tag
Web Portal Message
Film Supply: Unable to
Identify Film Cartridge
Description
System Impact
User Action
Show at DS
DICOM Printer
Status
Unique Symb. ID
Condition Code: 21-145 – Unsupported Media Type
Web Portal Message
Film Supply:
Unsupported Film Type
Description
System Impact
User Action
Show at DS
DICOM Printer
Status
Unique Symb. ID
Logged for RMS
4-52
Log Message
Film Supply: RF Tag
Reader failed to Read
or Write RF Tag data in
film cartridge
The imager attempts to read the RF tag in the film cartridge at power-up and
when a film cartridge is inserted. It attempts to write a new sheet count to the
tag after a successful film feed. The error is generated if invalid data is read or if
the write fails. The error is cleared when a film cartridge is removed and then re-
inserted.
Cannot print from the loaded film cartridge. The spooler is still able to accept
and queue jobs. [SI-2]
1. Insert a different film cartridge.
2. If the error persists, call for service.
True
WARNING
ERR_UP_CANTREAD_RFTAG
Log Message
Film Supply: Media
Type in film cartridge is
not supported
The imager obtains the media type and CE mark information from the RF Tag
when the film cartridge is loaded or when the imager is powered on. This error
occurs if the imager does not support the type at all.
The error is cleared when a film cartridge is removed and then re-inserted.
Cannot print from the loaded film cartridge. The spooler is still able to accept
and queue jobs. [SI-2]
The laser imager has not been configured to use this film type.
1. Try a different film type or reconfigure the imager.
2. If the error persists, call for service.
True
WARNING
ERR_UP_UNSUPPORTED_MEDIA
[CartridgeInfo=bbeeee-cjj-d-iii][FilmSize=size]
DICOM Printer
StatusInfo
BAD SUPPLY MGZ
DICOM Printer
StatusInfo
BAD SUPPLY MGZ
Severity
1-Alert
Severity
1-Alert
9G9002 – 2011-08-15