Imaging Assembly-Start Index Delay Adjustment - Konica Minolta DRYPRO SIGMA Service Manual

Imaging Assembly—Start Index Delay Adjustment
Adjustment Specification
To adjust Start of Scan timing to center an image left to right on the film
Purpose:
Borders on the left and right of the image should be equal.
Specification:
Special Tools:
None
Prerequisites
To Check:
The Start Index Delay affects the left edge of the film orientations shown.
[1] Log on to the service tool.
[2] From the Service menu, select Diagnostics > DRE > Advanced Test Print.
[3] Select Smpte8Bit from the Test Profile drop-down list.
[4] Click Run.
[5] Check the test print to verify the left and right borders are equal.
9G9002 – 2011-08-15
• Laptop computer with MICROSOFT INTERNET EXPLORER
• Service tool
• Crossover cable
Adjustments and Replacements
2-5