Konica Minolta DRYPRO SIGMA Service Manual page 22

SERVICE MANUAL
To Check:
[1] Energize the laser imager and let it warm to operating temperature.
[2] Prepare the meter:
(a) Install the block on the probe 140.0 mm (5.5 in.) from the probe sensor.
(b) Clean the probe with alcohol wipes.
(c) Set the meter to display in °C.
140.0 mm (5.5 in.)
[3] Remove the back cover.
2-2
Block
Probe Sensor
Probe
Meter
9G9002 – 2011-08-15