Completing The Mechanical Setup - Konica Minolta DRYPRO SIGMA Service Manual

SERVICE MANUAL

Completing the Mechanical Setup

Completing the Uncrating
[1] Locate and remove the accessories box that contains the documentation, cables, filter, and other accessories.
[2] Remove the 2 foam assemblies.
Accessories Box
[3] Remove the side covers from the crate.
[4] Remove the bag from the laser imager.
Caution
The laser imager weighs less than or equal to 54 kg (120 lb) as packaged.
Lift Point Front
[5] Using safe lifting techniques, lift the laser imager from the shipping pallet at the lift points shown and set it on a
flat surface.
1-2
Foam Assemblies
Lift Point Rear
9G9002 – 2011-08-15