Table of Contents
Advertisement
Rollback Motor
Prerequisites:
T20 Torx driver
Tools:
Removal
Rollback
Motor
H221_6006HC
[1] Disconnect the rollback motor connector.
Important
An anti-rotational nut secures the lower screw that holds the motor. Press the nut against the back of the motor as
you untighten the lower screw to keep the nut from falling down when the motor is released.
[2] Remove the:
(a) 2 screws
(b) Motor
Installation
Reverse the steps in the removal procedure.
9G9002 – 2011-08-15
• Close the film cartridge. (Touch the Pause button on the display screen.)
• De-energize the laser imager.
• Disconnect the power cord.
•
Remove the right cover
Adjustments and Replacements
2-29
Hide quick links:
Advertisement
Table of Contents
