Table of Contents
Advertisement
SERVICE MANUAL
Optics and Exposure Transport
Remove the imaging
Prerequisites:
T20 Torx driver
Tools:
Removal
[1] Remove 2 screws on each side of the imaging assembly where the optics and exposure transport are joined.
[2] Carefully separate the optics from the transport.
Screws
Optics
Installation
Reverse the steps in the removal procedure.
Note
Use the alignment pins near the screw holes to help line up the two components.
2-40
assembly.
Exposure Transport
Screws
9G9002 – 2011-08-15
Hide quick links:
Advertisement
Table of Contents
