Diagnostics - Konica Minolta DRYPRO SIGMA Service Manual

Section 4: Diagnostics
Using the Service Switch
The service switch is located behind the right cover at the top right corner of the MCS board.
[1] Touch the Pause icon on the display screen to close the film cartridge.
[2] De-energize the laser imager, and then disconnect the power cord.
[3] Remove the:
• Top cover (see Adjustments and Replacements,
• Right cover (see Adjustments and Replacements,
[4] To activate the service switch, push the button down to SERV.
[5] To deactivate the service switch, push the button up to NORMAL.
The Service Mode icon disappears from the display screen.
9G9002 – 2011-08-15
"Top Cover").
"Right Cover").
Service Switch

Diagnostics

4-1