SERVICE MANUAL
Left cover
Prerequisites:
Removal
[1] Remove the top cover.
[2] Loosen the captive thumb screw.
Captive Thumb Screw
Captive Thumb Screw
[3] Open the film supply.
[4] Loosen the captive thumb screw located under the exit tray.
Captive
Captive
Thumb Screw
Thumb Screw
[5] Remove the left cover.
Installation
Reverse the steps in the removal procedure.
2-10
• Close the film cartridge. (Touch the Pause button on the display screen.)
• De-energize the laser imager.
• Disconnect the power cord.
9G9002 – 2011-08-15