Ip Address Setting [3] - Konica Minolta Network Printer User Manual

HOME
Key Operator Mode
System Initial Setting [1] (continued)

IP Address Setting [3]

When using the server function, this setting is required to enable a PC to gain access to
this machine.
NOTE: Consult your network manager to perform this setting. Incorrect setting may cause a trouble with other
network systems.
❒ Setting options: IP address; Subnetmask; Gateway addess, Line speed setting
System Initial Setting Menu Screen
1 Press [ HELP ] to display the Help Screen, then touch Key Operator Mode .
Enter the 4-digit Key Operator password, then touch OK to display the Key Operator
Mode Screen.
NOTE: If an invalid password is entered, enter the valid 4-digit password.
2 Touch [1] System initial setting to display the System Initial Setting Menu Screen, then
touch [3] IP address setting to display the IP Address Setting Screen.
3 Make the required setting.
Touch to highlight the address key on the left, then enter the address numbers using the
screen keypad. Touch SET to fix the numbers, or touch RESET to clear.
4 When customizing the line speed, touch
Line speed setting
Speed Setting Screen. Touch the desired
key, then touch OK to restore the IP
Address Setting Screen.
5 Touch OK to complete the setting and
return to the System Initial Setting Menu Screen.
6 Touch RETURN to restore the Key Operator Mode Screen.
7 Touch RETURN to return to the Basic Screen and perform printing operations.
to display the Line
IP Address Setting Screen
Line Speed Setting Screen
Key Operator Mode 9-9