4 Network:
4.1 Setup an IP Address:
NOTE:
‐
If the company network has DHCP enabled, the DHCP setup might change the
printer IP address of the printer after rebooting. To make sure the DHCP server does
not change the printer IP address, disable DHCP in the printer.
Disable DHCP:
1. Press the
button.
button to highlight Interface Menu.
2. Press the
3. Press the
button.
4. Press the
button to highlight Ethernet.
5. Press the
button.
6. Press the
button to highlight TCP/IP.
7. Press the
button.
8. Press the
button to highlight DHCP.
9. Press the
button.
10. Press the
button to highlight the OFF setting.
11. Press the
button.
12. Press the
button until you see Ready.
Page 41 of 48