D Using The "Local Cq" (Local Area Call); D Using The "Gateway Cq" (Gateway Call) - Icom ID-4100A Advanced Manual

Previous view
4
D-STAR OPERATION
"TO" (Destination) setting (Continued)

D Using the "Local CQ" (Local Area call)

When "Local CQ" is selected on the TO SELECT
screen, "CQCQCQ" is set in "TO."
Example: Making a Local area call by accessing the
"Hirano" repeater.
1. Hold down [DR] for 1 second to display the DR
screen.
2. Select "TO," then push [ï].
• Displays the TO SELECT screen.
L On the DR screen, pushing [DR] toggles between
"FROM" and "TO."
3. Select "Local CQ," then push [ï].
• Returns to the DR screen, and "CQCQCQ" is
displayed in "TO."

D Using the "Gateway CQ" (Gateway call)

When "Gateway CQ" is selected on the TO SELECT
screen, you can select the repeater to make a
gateway call on the repeater list.
Example: Making a Gateway CQ call to the
"Hamacho" (Japan) repeater from the
"Hirano" repeater.
1. Hold down [DR] for 1 second to display the DR
screen.
2. Select "TO," then push [ï].
• Displays the TO SELECT screen.
L On the DR screen, pushing [DR] toggles between
"FROM" and "TO."
3. Select "Gateway CQ," then push [ï].
• Displays the REPEATER GROUP screen.
4. Select the repeater group where your destination
repeater is listed, then push [ï].
(Example: "11: Japan")
5. Select the destination repeater, then push [ï].
(Example: "Hamacho")
• Returns to the DR screen, and "Hamacho" is displayed
in "TO."
TIP: After selecting a destination repeater, you can
select another repeater preset in your repeater list
by rotating [DIAL].
4-9