Konica Minolta cm-5 Instruction Manual page 99

5. Press the [Back] button.
The screen returns to the <Graph and Data Settings>
screen.
Setting the Assess. Graph Screen to ON/OFF
The measurement result display function allows you to switch between various screens including "Absolute" or
"Difference". You can add the "Assess. Graph" screen based on tone data to these screens.
This section describes the procedure to set whether to display this "Assess. Graph" screen.
[Setting Procedure]
1. Use the or button of the cross key to move the
cursor to "Color Assessment Settings" and then press
the [OK/Edit] button.
The <Color Assessment Settings> screen is displayed.
2. Press the [OK/Edit] button.
The <Show Color Assess.> screen is displayed.
3. Use the or button of the cross key to move the
cursor to the desired item.
Settings
 OFF : The <Assess. Graph> screen is not displayed as
the measurement result screen.
 ON : The <Assess. Graph> screen is displayed as one of
the measurement result screens.
When the color assessment is set to ON, the <Assess.
Memo
Graph> screen is displayed instead of the <Diff.Graph>
screen. Moreover, color assessment is added to the
<Difference> screen.
Start the procedure from the <Graph and Data Settings> screen.
2
E97