Condition Setting; Setting The Measurement Conditions - Konica Minolta cm-5 Instruction Manual

Condition Setting

The CM-5 requires condition settings (measurement condition, measurement option, and color) before
measurement can be started.
To configure condition settings, select "Meas. Condition" (measurement conditions), "Meas. Option" (measurement
Memo
options) or "Color" (display conditions) from the <Configuration> screen to open an appropriate screen.

Setting the Measurement Conditions

To set measurement conditions, select "Meas. Condition" from the <Configuration> screen.
You can select or specify the following three items as the measurement conditions:
• Meas. Type: Select the measurement type such as reflectance measurement or transmittance
measurement.
• Meas. Area: When the measurement type is reflectance measurement, select an measurement area.
• SCI/SCE: When the measurement type is reflectance measurement, select the specular component
mode.
[Setting Procedure]
1. Press the [MENU] button.
The <Configuration> screen is displayed.
2. Use the or button of the cross key to move the
cursor to "Meas. Condition" and then press the [OK/
Edit] button.
The <Measurement Condition Settings> screen is
displayed.
• The <Measurement Condition Settings> screen shows the
current settings.
3. After you set the measurement conditions, you can
press the [Back] button to return to the screen
displayed before you press the [MENU] button in Step
1.
To return to the <Configuration> screen, press the
Memo
[MENU] button.
2
E59