Konica Minolta cm-5 Instruction Manual page 40

10.
When the 100% calibration is
completed, the <Auto 100% Cal.
Selection> screen appears.
Settings:
"Automatic": 100% calibration will be
performed automatically immediately
after instrument is switched on.
"Manual": 100% calibration must be
performed manually before taking
measurements.
To change settings, use the
button of the cross key to move the
cursor to the desired setting and then
press the [OK/Edit] button.
The cursor moves to "Next".
11. Check that the cursor is on "Next",
and press the [OK/Edit] button.
12.
If a USB memory device is not
connected, the <Meas. Cond. Settings
completed> screen appears. Skip to
step 13.
If a USB memory device is connected,
the <Save Condition File> screen
appears.
If the condition file will not be saved:
Check that the cursor is on "Next", and
press the [OK/Edit] button. The
<Meas. Cond. Settings completed>
screen appears. Skip to step 13.
To change the file name:
Use the or
to move the cursor to the current file
name and press the [OK/Edit] button.
The <Edit Name> screen will appear.
Use the cross key buttons to move the
cursor to the desired character and press the
[OK/Edit] button to confirm it.
Press the [CAL] button to erase characters.
When the file name has been input, press
the [MENU] button to move the cursor to
"Save", and press the [OK/Edit] button to
confirm the file name and close the screen.
To change a file name using the USB
keyboard, remove the USB memory device
while on the name editing screen, and input
the name after connecting the USB keyboard.
E38
or
button of the cross key
Memo
For details of 100%
calibration, refer to page 55.
Memo
Automatic 100% calibration is
convenient if measurements are
almost always performed without
changing the measurement type
or other measurement conditions
each time.
For details of automatic 100%
calibration, refer to page 55.
Memo
The USB memory device must
be connected to the instrument
before saving the condition file
to a USB memory device. For
information on connecting a
USB memory device, refer to
page 141 "Connecting a USB
Memory".
Memo
A USB keyboard can also be
used to input file names. For
information on connecting a
USB keyboard, refer to page
143 "Connecting a USB
Keyboard".
Notes
Keyboard input is not possible
if the cursor is in the file name
or
input field. Use the
button of the cross key to
move the cursor to the input
character before inputting with
the keyboard.