Chapter 3 - Measurement - Konica Minolta cm-5 Instruction Manual

<Measurement Condition Settings> screen
<Measurement Options> screen
<Color Settings> screen
<Calibration Option Settings> screen
<Graph and Data Settings> screen
<Output Settings> screen
<Screen Option Settings> screen
<Target Data Function> screen
• The extension of the condition setting file is ".cnd".
• The condition setting file can also be created by using the optional Color Data Software SpectraMagic™ NX.
When you create the condition setting file with SpectraMagic™ NX, you can set "User Index" as well as the
items above. For details, refer to the instruction manual of SpectraMagic™ NX.
[Setting Procedure]
1. Turn the instrument ON.
The <Welcome to Easy Setup Wizard!> screen appears after
the initial screen.
2. Connect the USB memory device containing the
condition setting file (.cnd) to the USB connection
terminal, use the
move the cursor to "Use Condition File" and then press
the [OK/Edit] button.
The <Select the Condition File> screen appears.
3. Use the or
cursor to the desired condition setting file and then
press the [OK/Edit] button.
When there are six or more files, you can switch the page
Memo
by using the
• The <Loading...> screen is displayed.
• When the condition setting file has been loaded, the
<Measurement Condition Settings> screen is displayed.
• After setting the conditions, you need to perform zero
Notes
calibration (0% Calibration) and white calibration (100%
Calibration). Go to page 52 "Calibration".
• If you change the conditions after the instrument is
turned on, you need to perform zero calibration (0%
Calibration) and white calibration (100% Calibration)
again.
E110
or button of the cross key to
button of the cross key to move the
button of the cross key.
or
"Meas. Type", "Meas. Area", "SCI/SCE"
"Auto Measurement (1-10)", "Manual Measurement (1-30)"
"Color Space", "Color Index", "Observer", "Illuminant 1",
"Illuminant 2"
"Calibration Data"
"Custom Data View Settings", "Color Assessment Settings"
"Serial Printer Settings", "USB Memory Stick Settings"
"LCD Brightness"
"Data Protect"