Konica Minolta cm-5 Instruction Manual page 25

Control Buttons
Use these buttons to set items or change screens according to the guide on the LCD screen.
1
2
[Target/Sample] button
1
[Detail/List] button
2
[CAL] button
3
[MENU] button
4
Cursor key
5
( / / /
[OK/Edit] button
6
[Back] button
7
8 [MEAS] button
[PRINT] button
9
Enabling/Disabling Control Buttons
Memo
Buttons for this instrument can be enabled or disabled as desired using the optional Color Management Software
SpectraMagic™ NX (CM-S100w), such as to enable just the [MEAS] button.
For more information, refer to the information for the "Standalone Configuration" dialog box of the Color
Management Software SpectraMagic™ NX (CM-S100w).
3 5
4
Switches between <Target> screen and <Sample> screen.
When the <Sample> or <Target> screen is displayed, use this button to
switch between the detail display and list display.
Displays the <Calibration> screen.
Displays the <Configuration> screen.
Holding down the [MENU] button displays the <Welcome to Easy
Setup Wizard!> screen.
Moves the cursor on the screen or changes the selected value.
To determine the item indicated by the cursor, press the [OK/Edit]
)
button.
Sets the item indicated by the cursor or saves the setting.
Cancels the setting or returns to the previous step on each setting screen.
Performs calibration or measurement.
Outputs the sample data to the connected serial printer.
6
7 8 9
E23
1