Konica Minolta cm-5 Instruction Manual page 89

Save to USB memory device
Save all target color data stored in the instrument to the USB memory device.
The USB memory device must be connected to the instrument before saving the data. For the connection of a
USB memory device, refer to page 141 "Connecting a USB Memory".
A USB keyboard can also be used to input file names. For information on connecting a USB keyboard, refer to page
Memo
143 "Connecting a USB Keyboard".
[Setting Procedure]
1. Use the or button of the cross key to select the
"All" tab, use the
"Save", and then press the [OK/Edit] button.
2.
The < Target List > screen appears, with all targets initially
selected (check marks shown in the box to the left of the target
name.
• To deselect a target with a check mark, move the cursor to
the target and then press the [OK/Edit] button.
• To deselect all targets shown on the screen, use the
button of the cross key to move the cursor to the "Page"
button and then press the [OK/Edit] button. The check
marks to the left of all targets shown will disappear.
button of the cross key to move to other
• Use the or
pages in instrument memory. Selected data will remain
selected even if pages are changed.
3. When selection/deselection of targets has been
completed, use the
move the cursor to the "Save" button and then press the
[OK/Edit] button.
The <Save Target Data> screen is displayed with a suggested
file name shown.
4. To change the file name, use the
cross key to move the cursor to "File Name" and then
press the [OK/Edit] button.
The <Edit Name> screen is displayed.
Memo
Connect a USB keyboard to input file names using the USB
keyboard.
Start the procedure from the <Target Data Functions> screen.
or button to move the cursor to
or button of the cross key to
or button of the
or
2
E87