Setting The Date And Time - Konica Minolta cm-5 Instruction Manual

Setting the Date and Time

To set date and time, select "System" from the <Configuration> screen.
[Setting Procedure]
1. Press the [MENU] button.
The <Configuration> screen is displayed.
2. Use the or button of the cross key to move the
cursor to "System" and then press the [OK/Edit]
button.
The <System Settings> screen is displayed.
3. After you set the screen options, press the [Back] button
to return to the <Configuration> screen.
Setting the Clock
This instrument has a built-in clock to record the date and time of measurement. Since the date and time have
been set at the factory, you do not need to change them under normal conditions. If necessary, you can change
the date and time settings.
[Setting Procedure]
1. Use the or button of the cross key to move the
cursor to "Date & Time" and then press the [OK/Edit]
button.
The <Data and Time Setting> screen is displayed.
Start the procedure from the <System Settings> screen.
2
E105