Konica Minolta cm-5 Instruction Manual page 102

7. Press the [OK/Edit] button.
The selection is confirmed and the screen returns to the
<Spectral Graph Settings> screen.
If you press the [Back] button without pressing the [OK/
Notes
Edit] button, you return to the <Spectral Graph
Settings> screen without changing the setting.
8. Repeat Steps 5 to 7 for "Specific Wavelength 2" and
"Specific Wavelength 3".
9. To select whether or not the target data curve will be
shown on the graph, use the
key to move the cursor to "Show Target" and then press
the [OK/Edit] button.
10. Use the or
cursor to the desired item.
Settings
Off : Target data curve is not shown on the spectral graph.
On : Target data curve is shown on the spectral graph.
11. When all of the necessary changes have been made,
press the [Back] button.
The screen returns to the <Graph and Data Settings>
screen.
E100
or button of the cross
button of the cross key to move the