Connecting The Ac Adapter; Turning Power On/Off - Konica Minolta cm-5 Instruction Manual

Connecting the AC Adapter

Notes • To supply AC power to the instrument, always use the AC adapter (AC-A305) supplied with the instrument.
• Before connecting or disconnecting the AC adapter jack or plug, make sure that the instrument is turned OFF.
[Procedure]
1. Make sure that power is OFF (Power switch is set to
"").
2. Connect the AC adapter's connector plug to the adapter's
terminal.
3. Insert the AC adapter power plug into an AC outlet (100
to 240 VAC, 50-60 Hz).

Turning power ON/OFF

[Procedure]
Turning power ON
1. Turn the power switch to the " ❙ ".
The power will be turned ON (energized).
[Procedure]
Turning power OFF
1. Turn the power switch to the "".
The power will be turned OFF.
E20