Displaying The Measurement Results; Sample> Detail Screen: Absolute - Konica Minolta cm-5 Instruction Manual

Displaying the Measurement Results

At the end of measurement, the measurement results will be displayed on the LCD according to the specified
conditions. Typical measurement result screens are shown below.
Notes
Measurement results cannot be switched when "Communicating" is displayed while the instrument is connected to
a PC.
Memo
You can switch the tab of the measurement screen with the
screen switching, refer to page 120 "Switching the Display Contents of the Measurement Results".
You can switch the sample data No. with the
<Sample> Detail Screen: Absolute
10
1 Data No. of the currently selected target color data
2 White calibration completed
3 Measurement possible
4 USB memory device connection (No connection when the icon is not displayed)
5 Automatic printing from serial printer set to ON (OFF when the icon is not displayed)
6 Current time
7 Current measurement type (Ref: Reflectance measurement, Tra: Transmittance measurement, Pet: Petri
Dish measurement, Liq: Liquid measurement)
8 Current measurement area
9 Current specular component mode
For details of the status bar items 1 to 9, refer to page 22.
10 Sample data No.
11 Date and time of the measurement
12 Measurement type used for the measurement (Ref: Reflectance measurement, Tra: Transmittance
measurement, Pet: Petri Dish measurement, Liq: Liquid measurement)
13 Measurement area used for the measurement
14 Specular component mode used for the measurement
15 Pseudocolor expressing the sample data
16 Name of the sample data
17 Data No. of the target color data used for the measurement
18 Sample data (The tab can be switched with the
or
1 2 3 4 5
11
15 16
button of the cross key. For details of the
or
button of the cross key.
6 7 8 9
12 13
17
or button of the cross key.)
3
14
18
E113