Delete - Konica Minolta cm-5 Instruction Manual

Delete

Delete the sample data.
[Operating Procedure]
1. Use the or
"Current" tab, use the
cursor to "Delete" and then press the [OK/Edit] button.
The <Delete Sample Data> screen is displayed.
2. Use the button of the cross key to move the cursor to
"OK" and press the [OK/Edit] button. The data is
deleted.
When data is deleted, the subsequent sample data Nos. will
Memo
be reassigned, reducing them by one.
• When the deletion is complete, the screen returns to the
<Sample> detail screen.
• When you place the cursor on "Cancel" and press the [OK/
Edit] button, the deletion is canceled and the screen returns
to the <Sample> detail screen.
E128
Start the procedure from the <Sample Data Functions> screen.
button of the cross key to select the
or or button to move the