Konica Minolta cm-5 Instruction Manual page 150

Printing Out Sample Data/Target Color Data
Print the sample data or target color data with the printer.
You need to connect the instrument to a serial printer in advance.
Only text data can be output to a serial printer for printing. You cannot output the color difference graph or other
Memo
graphs displayed on the instrument.
[Operating Procedure]
1. Press the [PRINT] button. The <Print Sample Data> or
<Print Target Data> screen is displayed and the data is
printed from the connected printer.
• When the printing is complete, the screen returns to the
<Sample> detail screen or <Target> detail screen.
• The <Print Sample Data> or <Print Target Data>
Notes
screen is displayed also for the case where printing will
not be processed properly such as when the printer
connection is incorrect.
• On the <Sample> list screen or <Target> list screen,
printing is disabled even when the measurement result is
displayed on the screen.
In addition to the procedure above, printing can be started
Memo
on the <Sample Data Function> screen or <Target Data
Function> screen. For the procedure, refer to page 127
"Sample Data Operation: Print" or page 84 "Color
Difference Target Color Data Operation: Print".
Setting the Auto Print
When the Auto Print is set to ON, sample data or target color data is automatically printed on the printer for
every measurement.
You need to connect the instrument to a serial printer in advance.
Only text data can be output to a serial printer for printing. You cannot output the color difference graph or other
Memo
graphs displayed on the instrument.
[Operating Procedure]
1. Press the [MENU] button.
The <Configuration> screen is displayed.
E148
Start the procedure from the <Sample> detail screen or <Target> detail screen where a measurement result is displayed.