Konica Minolta cm-5 Instruction Manual page 90

5. Use and
move the cursor around the characters and then press
the [OK/Edit] button.
The selected character is displayed in the text box.
6. Repeat Step 5 until you enter necessary characters.
• You can use the
the blue box cursor on the text box. In this status, you can
move the character position and modify the character by
pressing the <
• To delete the character to the left of the cursor in the text
box, press the [CAL] button.
• Up to 20 characters can be used.
7. When you are finished entering characters, use
or and
cursor to "Save" and then press the [OK/Edit] button.
The setting is confirmed and the screen returns to the <Save
Target Data> screen.
• If you press the [Back] button during the setting, "Do
Memo
you want to save the changes?" is displayed. When you
place the cursor on "OK" and press the [OK/Edit]
button, the setting details are confirmed and the screen
returns to the <Save Target Data> screen. When you
place the cursor on "Cancel" and press the [OK/Edit]
button, the setting details are not changed and the
screen returns to the <Save Target Data> screen.
• Disconnect any USB keyboards connected to the
instrument.
8. Connect the USB memory device. To accept the
displayed file name, use the
key to move the cursor to
then press the [OK/Edit] button.
• The <Saving...> screen is displayed.
• When the saving is complete, the screen returns to the
<Target> screen.
E88
or and buttons of the cross key to
or button of the cross key to move
or > button of the cross key.
buttons of the cross key to move the
or button of the cross
"Save Target Data" and
and