Table of Contents
Advertisement
Auto Measurement (1-10)
Specify the number of measurements for auto averaging.
The average of the data obtained from the specified number of continuous measurements is determined as
sample data.
[Setting Procedure]
1. Use the
or
cursor to "Auto Measurement (1-10)" and then press the
[OK/Edit] button.
Above and below the cursor and are displayed.
2. Use the
or
value.
Settings
1 to 10 times:
Specify the number of measurements, from 1 to 10 times, to
perform when using auto averaging.
3. Press the [OK/Edit] button.
The selection is confirmed.
If you press the [Back] button without pressing the [OK/
Notes
Edit] button, you return to the <Measurement Options>
screen without changing the setting.
E64
Start the procedure from the <Measurement Options> screen.
button of the cross key to move the
button of the cross key to specify a
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
