Transmittance Measurement And Liquid Measurement - Konica Minolta cm-5 Instruction Manual

Transmittance Measurement and Liquid Measurement

To use the instrument for transmittance measurement, attach the Transmittance Mask on the illumination
window of the Transmittance Specimen Chamber and then set a specimen.
The Transmittance Measurement Set allows you to set a container containing a liquid specimen or a specimen in
the form of plate or film easily and reliably.
To conduct measurement using a commercially-available 10 mm-wide Cell, using the 10 mm Wide Cell
Measurement Set allows you to set the cell easily and reliably.
Required accessory
Transmittance Mask
ø20 mm
CM-A200
Transmittance Measurement Set CM-A206 (Optional)
Transmittance Zero
Calibration Plate
CM-A213
Cell (Optional)
Cell: 2 mm
CM-A97
Plastic Cell (Optional)
Plastic Cell: 2 mm
CM-A130
10 mm Wide Cell Measurement Set CM-A207 (Optional)
Transmittance Specimen Holder (10 mm wide) CM-A198
E48
Transmittance Specimen
Holder
CM-A96
Cell: 10 mm
CM-A98
Plastic Cell: 10 mm
CM-A131
Notes
Do not touch the inner surface (edge) of the
Transmittance Mask with your fingers or wipe it
with a cloth to remove dust.
Transmittance Specimen
Holder Attachment
CM-A199
Cell: 20 mm
CM-A99
Plastic Cell: 20 mm
CM-A132
Transmittance Zero Calibration
Plate (10 mm) CM-A204
Accessory Case
CM-A193