Konica Minolta cm-5 Instruction Manual page 149

3. Use the or button of the cross key to move the
cursor to "Serial Printer Settings" and then press the
[OK/Edit] button.
The <Serial Printer Settings> screen is displayed with a
currently-specified baud rate. Other communication
parameters cannot be changed.
4. To change the baud rate, use the
cross key to move the cursor to "Baud Rate" and then
press the [OK/Edit] button.
The <Baud Rate> screen is displayed.
5. Use the or button of the cross key to move the
cursor to the desired item.
Settings
 4 800 bps
 9 600 bps
 1 9200 bps
6. Press the [OK/Edit] button.
The selection is confirmed and the screen returns to the
<Serial Printer Settings> screen.
If you press the [Back] button without pressing the [OK/
Notes
Edit] button, you return to the <Serial Printer Settings>
screen without changing the setting.
7. Press the [Back] button three times to return to the
<Sample> screen.
or button of the
4
E147