Edit Name - Konica Minolta cm-5 Instruction Manual

Edit Name

Name the sample data.
[Operating Procedure]
1. Use the or
"Current" tab, use the
cursor to "Edit Name" and then press the [OK/Edit]
button.
The <Edit Name> screen is displayed.
A USB keyboard can also be used to input names for
Memo
sample data. For information on connecting a USB
keyboard, refer to page 143 "Connecting a USB Keyboard".
2. Use and
move the cursor around the characters and then press
the [OK/Edit] button.
• Up to 20 characters can be used.
• The selected character is displayed in the text box.
3. Repeat Step 2 until you have entered the necessary
characters.
• You can use the
the blue box cursor on the text box.
In this status, you can move the character position and
modify the character by pressing the
cross key.
• To delete the character to the left of the cursor in the text
box, press the [CAL] button.
4. When you finish entering characters, press [MENU]
button, move the cursor to "Save", and then press the
[OK/Edit] button.
The setting is confirmed and the screen returns to the
<Sample> detail screen.
If you press the [Back] button during the setting, "Do you
Memo
want to save the changes?" is displayed. When you place
the cursor on "OK" and press the [OK/Edit] button, the
setting details are confirmed and the screen returns to the
<Sample> detail screen. When you place the cursor on
"Cancel" and press the [OK/Edit] button, the setting
details are not changed and the screen returns to the
<Sample> detail screen.
E126
Start the procedure from the <Sample Data Function> screen.
button of the cross key to select the
or button to move the
or and buttons of the cross key to
button of the cross key to move
or
button of the
or