Konica Minolta cm-5 Instruction Manual page 86

If you press the [Back] button during the setting, "Do you
Memo
want to save the changes?" is displayed. When you place
the cursor on "OK" and press the [OK/Edit] button, the
setting details are confirmed and the screen returns to the
<Target> screen. When you place the cursor on "Cancel"
and press the [OK/Edit] button, the setting details are not
changed and the screen returns to the <Target Data
Functions> screen.
Print
Print the target color data.
You need to connect the instrument to a serial printer in advance. For the connection of the instrument and a
serial printer, refer to "Printer Connection" (Page 145).
• If the connection is not established properly, printing is disabled.
Notes
• Even if the connection has been correctly established, printing may fail for reasons such as the printer is turned
off when printing is attempted.
[Procedure]
1. Use the or
"Current" tab, and use the
cursor to "Print".
2. Press the [OK/Edit] button. The <Print Target Data>
screen is displayed and the data is printed from the
connected printer.
• When the printing is complete, the screen returns to the
<Target> screen.
The <Print Target Data> screen is also displayed for the
Notes
case where printing will not be processed properly such as
when the printer connection is incorrect.
E84
Start the procedure from the <Target Data Function> screen.
button of the cross key to select the
or button to move the