Editing Target Color Data - Konica Minolta cm-5 Instruction Manual

Editing Target Color Data

The <Target Data Function> screen allows the following operations for target color data.
"Current" tab
• Save: Saves the current target color data to a USB memory device.
• Statistics: Performs statistical calculations using multiple target color data selected in a list screen.
• Edit Name: Name the target color data.
• Print: Print the target color data.
• Tolerance: Specify the tolerance (box tolerance) used for pass/fail judgment of measured data.
• Delete: Delete the target color data.
"All" tab
• Save:
• Tolerance: (Def.)
• Data Protect:
• Delete All:
[Setting Procedure]
1. On the <Target> screen, press the [OK/Edit] button.
The <Target Data Function> screen is displayed.
2. Use the or
tab, use the
desired item to set or start, and then press the [OK/
Edit] button.
The setting screen for the selected item is displayed.
For the setting procedure of each item, refer to the following
sections.
3. On the <Target Data Function> screen, press the [Back]
button to return to the <Target> screen.
E78
Save all target color data to the USB memory device. This option can be selected only
when a USB memory device has been connected.
Before setting tolerance for individual target color data, set default tolerance to be
applied to all target color data in common.
Disable the deletion or editing of the target color data. When the data protection is set,
you cannot select "Edit Name", "Tolerance", "Delete" and "Delete All" on the <Target
Data Function> screen.
Delete all target color data when the data protection is not set.
button of the cross key to select the
or button to move the cursor to the